What Is The Principle Of Car Starting Power Supply

The principle of car starting power supply is to supply the car with starting power through self switching and self resetting (mutual switching device) when AC power is input, and the system controller charges and manages the AC power through the charger. Under the system regulation of the controller, the inverter will stop working. The input AC power will be supplied to cars or other charging electronic products through mutual switching devices (self switching and self resetting). The usage method of the car starting power supply is as follows: pull up the manual brake, place the clutch in neutral, check the starter switch, and it should be in the OFF position; Please place the emergency starter on a stable ground or non moving platform, away from the engine and belt; Connect the red positive clip (+) of the "emergency starter" to the positive pole of the battery that is running out of power. Ensure that the connection is secure. Connect the black auxiliary clip (-) of the "emergency starter" to the ground pillar of the car and ensure that the connection is secure. Check the correctness and firmness of the connection. Start the car (no more than 5 seconds). If a single start is unsuccessful, please wait for more than 5 seconds. After success, remove the negative clip from the ground pillar. Remove the red positive clip of the "emergency starter" (commonly known as "Guojianglong") from the positive pole of the battery. After the battery is used up, please charge it.