Many people have experienced a situation where their car won't start, especially when the battery is dead or they forgot to turn off the lights overnight. At this time, a Portable Emergency Car Battery Jump Starter can be a big help. So how do you use it? It's actually very simple, just follow this article.
What is a Portable Jump Starter?
In simple terms, it is an emergency power supply with its own battery that can provide starting power to the car when the car battery is dead, allowing you to restart the car.
What should you pay attention to before using a Jump Starter?
Before you get started, remember a few safety tips:
Check the manual, some details may vary from model to model.
Make sure the device has enough power, the power must be above 50% to successfully start.
Turn off the electrical appliances in the car (air conditioning, lights, radio, etc.) to avoid extra power consumption.
Make sure you are in a safe place, such as a roadside or parking lot, and don't stand in traffic when operating.
How to use a Portable Jump Starter?
The operation is actually very simple, divided into 4 steps:
1. Connect the cable
Find the positive terminal (red "+" sign) and negative terminal (black "-" sign) of the car battery.
The red clip is clamped on the positive terminal of the battery, and the black clip is clamped on the negative terminal.
2. Turn on the Jump Starter
Press the power switch of the device. Some models will have a "start mode" button, and switch to the corresponding mode.
3. Start the car
Get in the car and turn the key or press the start button. The car usually starts in a few seconds.
If it doesn't work the first time, wait 30 seconds and try again.
4. Remove the Jump Starter
After the car starts, turn off the Jump Starter first, and then remove the clips in order (negative first, then positive).
