This article will teach you how to use the emergency starter correctly and safely. The steps are simple and clear, and novices can operate it with confidence!
Correct steps to use the emergency starter
1.Connect the battery clamp to the starter
First, connect the red and black battery clamp plugs to the starter interface. Pay attention to check whether they are plugged in tightly. Generally, there will be a "click" sound, indicating that they are plugged in firmly.
This is the first step of power supply. If it is not connected properly, it may not start.
2.Red clamp connects to the positive pole and black clamp connects to the negative pole
Open the hood and find the car battery.
The red clamp is clamped to the positive pole (+) of the battery
The black clamp is clamped to the negative pole (-) of the battery
3.Start the vehicle
When everything is ready, enter the cab and start the vehicle as usual.
The vehicle will start successfully in a few seconds.
Tip: If it does not start the first time, wait a few seconds and try again, but do not try too many times in a row.
4.Unplug the power supply within 30 seconds after starting
After the vehicle is successfully started, the starting power supply should be turned off immediately and the battery clamp should be unplugged within 30 seconds.
First pull out the black clamp (negative pole)
Then pull out the red clamp (positive pole)
Finally, unplug the battery clamp from the starting power supply and put away the tool
✅ Note: Do not connect the starting power supply for a long time to avoid affecting the life of the equipment or causing safety risks.

Tips for use
Make sure the starting power supply is fully charged, preferably above 75% before use
Charge the device in time after each use and keep it in standby mode
Confirm that the vehicle is turned off before starting, and all electrical appliances (lights, air conditioners, audio) are turned off
It is not recommended to frequently use the starting power supply instead of the battery, mainly for emergency starting
What situations are the starting power supply suitable for?
Battery power loss, long-term non-starting
Cold weather causes battery performance to deteriorate
Emergency standby during business trips/travel
Also applicable to motorcycles, electric vehicles, small trucks, etc. (select matching models)
